Mini-TE
ELECTRO-STATIC PIPEBURSTER
Designers note:
"Designed for replacing smaller sewer pipes between service shafts and small excavations"
37 metric tons of pulling power
Ø40 mm. → Ø250 mm. operational range
Pipe materials: Can operate in all known pipe materials
Video introduction
Tools
Support plate
Support Plate
Radius 500 mm. Positioned between the concrete shaft-wall and the pulling unit during installation.
Extractor frame
Hydro-Static Extractor Frame
The hydraulic device extracts the bursting head and new product pipe from the ground, - here shown inside a Ø1000 mm. service shaft (1:1)
Solid steel rods
Solid steel rods
Model mini-TE high-grade composite material, designed for high safety margin.
Hydraulic power pack
Mini-TE power pack, 7.5 kW electric engine. 250 bar op. pressure.
Video manuals
Download PDF
Specifications
Pulling unit
Power pack
Steel rods
Pulling force
37 metric tons
( 81600 lbs. )
Measurements
60 x 44 x 48 cm.
( 23.6 x 17.3 x 18.9 inch. )
80 x 60 x 136 cm.
( 31.5 x 23.6 x 53.5 inch. )
Std. Ø45 mm. x 0.30 meter.
( 1.77 x 11.80 inch. )
Option Ø30 mm. x 0.30 meter.
( 1.18 x 11.80 inch. )
Weight
158 kg.
( 348 lbs. )
630 kg.
( 1388 lbs. )
Ø45 mm. steel rod: 2.90 kg.
( 6.4 lbs. )
Ø30 mm. steel rod: 1.35 kg.
( 3.0 lbs. )
Engine
Electric 7.5 kW
400 volt 16 amp. 50 Hz
Connection:
3P + N + PE CEE
Hydraulic system
3 cylinders
Max 250 bar.
( 3625 psi. )
1 variable pump
Variable pump flow:
< 100 bar / 60 ltr. / min.
( < 1450 psi. / 15.8 gal. / min. )
Hydraulic oil cap. 60 ltr.
( 15.8 gal. )
Operational speed
Up to 1.00 meter. / min.
( 3.3 ft. / min. )
Cylinder stroke: 10 cm.
( 3.9 inch. )
Operational range,
Existing pipe diameter
Ø40 mm. → Ø250 mm.
( 1.5 → 10.0 inch. )
Download PDF