Maxi-T
HYDRO-STATIC PIPEBURSTER
Designers note:
"Designed for replacing larger sewer pipes between service shafts and small excavations"
60 metric tons of pulling power
Ø80 mm. → Ø400 mm. operational range
Pipe materials: Can operate in all known pipe materials
Video introduction
Tools
Support plate
Support Plate
Radius 500 mm. Positioned between the concrete shaft-wall and the pulling unit during installation.
Extractor frame
Hydro-Static Extractor Frame
The hydraulic device extracts the bursting head and new product pipe from the ground, - here shown inside a Ø1000 mm. service shaft (1:1)
Solid steel rods
Solid steel rods
Model Maxi-T high-grade composite material, designed for high safety margin.
Hydraulic Power Pack
21 bhp. gasoline hydraulic Power Pack. Max. pressure 250 bar.
Video manuals
Download PDF
Specifications
Pulling unit
Power pack
Steel rods
Steel rods
60 metric tons
( 134400 lbs. )
Measurements
73 x 54 x 58 cm.
( 28.7 x 21.3 x 22.8 inch. )
122 x 65 x 100 cm.
( 48.0 x 25.6 x 39.4 inch. )
Std. Ø60 mm. x 0.33 meter.
( 2.36 x 13.0 inch. )
Weight
380 kg.
( 838 lbs. )
250 kg.
( 550 lbs. )
Ø60 mm. steel rod 2.9 kg.
( 12.7 lbs. )
Engine
Vanguard Petrol air-cooled
22 bhp. / 16.40 kW.
Electrical start, 4-stroke
Fuel cap. 20 ltr.
( 4.4 gal. )
Fuel consumption: 4 ltr. / hr.
( 0.9 gal. / hr. )
Hydraulic system
3 cylinders
250 bar / 3625 psi.
Variable pump flow:
18 ltr. / min. 2500 rpm.
( 3.95 gal. / min. / 2500 rpm. )
Hydraulic oil cap. 60 ltr.
( 13.2 gal. )
Operational speed
Up to 0.6 meter. / min.
( 2 ft. / min. )
Cylinder stroke: 11 cm.
( 4.3 inch. )
Operational range,
Existing pipe diameter
Ø80 mm. → Ø400 mm.
( 3.0 → 16 inch. )
Download PDF